Sc800: Overall System; Sc800 - Ricoh D131 Service Manual

SC800: Overall System

2.9 SC800: OVERALL SYSTEM

2.9.1 SC800:

SC816 D
SC817 D
Error Codes
Code
0x0000 0000
0x0000 0001
0x0000 0002
0x0000 0003
0x0000 0004
0x0000 0005
D131/D132/D133
Energy save I/O subsystem error
The energy save I/O subsystem is defective or this system
detected a controller board error.

Reboot the machine.

Replace the controller board.
Monitor error
This is a file detection and electronic file signature check error
when the boot loader attempts to read the self-diagnostic module,
system kernel, or root system files from the OS Flash ROM, or the
items on the SD card in the controller slot are false or corrupted.

OS Flash ROM data defective

SD card data defective
1. Change the controller firmware.
2. Use another SD card.
Meaning
BIOS boot error
Primary boot start load error
Secondary boot load error (Boot3.Elf)
Self-diagnostic module error (Diag.Elf)
Kernel start error (Netbsd)
Root file system file read error (Rootfs)
2-70
GW
SM Appendix