4.9.6 FUSING LAMPS, HOT ROLLER, AND PRESSURE ROLLER
If you wish to remove the pressure roller only, without removing the hot roller and fusing
lamps, please do not use this procedure. Use the procedure in the next section.
Fusing Lamps
1.
Fusing unit
p.4-70
2.
Rear terminal connector bracket [A] (
3.
Rear fusing lamp holder [C] (
SM
x 2, metal clamp x 3,
x 1)
4-77
Fusing Unit
[B] x 6)
D131/D132/D133