Ricoh D131 Service Manual page 566

Application function selection error
The application selected by the operation panel key operated
abnormally (No response, abnormal ending).

Software (including the software configuration) defective

An option required by the application (RAM, DIMM, board) is not
installed.

Nesting of the fax group addresses is too complicated.
SC997 B

Check the devices necessary for the application program. If
necessary devices have not been installed, install them.

Check that application programs are correctly configured.

For a fax operation problem, simplify the nesting of the fax group
addresses.

Take necessary countermeasures specific to the application
program. If the logs can be displayed on the operation panel, see
the logs.
Application start error
No applications start within a specified time after the power is turned
on.

Loose connection of RAM-DIMM, ROM-DIMM

Defective controller
SC998 D

Software problem

Check the setting of SP5-875-001. If the setting is set to "1 (OFF)",
change it to "0 (ON)".

Check if the RAM-DIMM and ROM-DIMM are correctly connected.

Reinstall the controller system firmware.

Replace the controller board.
SM Appendix 2-99
SC900: Miscellaneous
GW
GW
D131/D132/D133