Ricoh D131 Service Manual page 547

SC800: Overall System
Data encryption conversion errors
SC859 B
Data encryption on the HDD failed.
01 HDD encrypted data restoration error
Data could not be restored after encryption.



02 Power interrupt error
Power supply was interrupted during data encryption.

08 HDD Check Error
Data conversion was attempted with no HDD unit present.


Note: After installation, a new HDD should be formatted with
SP5832-1
09 Power Loss During Data Conversion
Data conversion stopped before NVRAM/HDD data was converted.

10 Data Read Command Error
More than two illegal DMAC communications were returned.



D131/D132/D133
HDD connection loose, broken, defective
Format HDD
HDD defective
Cycle the machine off/on
Confirm that HDD unit installed correctly
Initialize HDD with SP5832-1
Format HDD with SP5832-1
HDD defective
Format HDD with SP5832-1
Replace HDD
2-80
GW
SM Appendix