Ricoh D131 Service Manual page 696

The rescue certification of No. 17 has been recorded, and the GW URL
18
is being notified of the failure of the certification update.
CERT: Error
Displays a number code that describes the reason for the request for update of
the certification.
0 Normal. There is no request for certification update in progress.
Request for certification update in progress. The current certification
1
has expired.
68 An SSL error notification has been issued. Issued after the certification
2
has expired.
Notification of shift from a common authentication to an individual
3
certification.
4 Notification of a common certification without ID2.
5 Notification that no certification was issued.
6 Notification that GW URL does not exist.
69 CERT: Up ID
The ID of the request for certification.
83 Firmware Up Status
Displays the status of the firmware update.
85 Firm Up User Check
This SP setting determines if the operator can confirm the previous version of
the firmware before the firmware update execution. If the option to confirm the
previous version is selected, a notification is sent to the system manager and
the firmware update is done with the firmware files from the URL.
86 Firmware Size
Allows the service technician to confirm the size of the firmware data files
during the firmware update execution.
SM Appendix
SP5000 Mode: SP5024 to SP5816
3-121 D131/D132/D133