Printer Switches - Ricoh D131 Service Manual

4.4.2 PRINTER SWITCHES

No Function
Select page separation marks
0 0: Off
1: On
Repetition of data when the
received page is longer than
1 the printer paper
0: Off
1: On
Prints the date and time on
received fax messages
2
0: Disabled
1: Enabled
3-7 Not used
SM
Printer Switch 00 (SP No. 1-103-001)
0: If a 2 page RX transmission is split, [*] is
printed in the bottom right corner of the 1st page
and only a [2] is printed in the upper right corner
of the 2nd page.
1: If a 2 page RX transmission is split into two
pages, for example, [*] [2] is printed in the bottom
right corner of the 1st page and only a [2] is
printed in the upper right corner of the 2nd page.
Note: This helps the user to identify pages that
have been split because the size of the paper is
smaller than the size of the document received.
(When A5 is used to print an A4 size document,
for example.)
1: Default. 10 mm of the trailing edge of the
previous page are repeated at the top of the next
page.
0: The next page continues from where the
previous page stopped without any repeated text.
This switch is only effective when user parameter
02 - bit 2 (printing the received date and time on
received fax messages) is enabled.
1: The machine prints the received and printed
date and time at the bottom of each received
page.
Do not change the settings.
Comments
129 D619