Fax Connection Unit Type E (D621); Accessories; Overview - Ricoh D131 Service Manual

1.4 FAX CONNECTION UNIT TYPE E (D621)

1.4.1 ACCESSORIES

Check the quantity and condition of the components against the following list.
No.
1. Remote Fax Card Type 31
2. Remote Fax Card Type 32

1.4.2 OVERVIEW

This option is used to connect up to six machines without fax hardware (FCU and G3 boards) to
only one machine with an FCU and G3 board installed. Every connected machine acts as a fax
machine. As only one machine requires the fax hardware, this achieves a significant cost
reduction. However, each of the six machines requires the Fax Connection Unit.
The machines must be on the same network. In the drawing above, [A] has the FCU (Fax Option
Type 9002 (D619)) and at least one G3 interface board installed (G3 Interface Unit Type 9002
(D619)). Another machine [B] without the fax hardware (in the same network) can be connected to
the master machine to make it capable of functioning as a fax.

The machine with the fax hardware installed is the Master machine.

The machine without the fax hardware connected to the master machine is the Slave
machine.
There are some restrictions.

The machines must be on the same network.

Every Master and Slave machine requires installation of the Printer/Scanner Unit Type 9002
(D620).
D619
Description
30
Q'ty
1
1
SM