Ricoh D131 Service Manual page 509

SC600: Data Communication
Modem board is not installed even though the setting at Cumin-M
(During the operation)
The authentication for the Cumin-M fails failed at a dial up connection
due to one or more of the following:





Modem board error 1
Modem board not installed or the board is defective.

13


Modem board error 2
Modem board not installed or the board is defective.
14


For more details about this SC code error, execute SP5990 to print an SMC report so you can
read the error code. The error code is not displayed on the operation panel. Here is a list of error
codes:
D131/D132/D133
Incorrect SP settings
Disconnected telephone line
Disconnected modem board
Disconnected wireless LAN card
Check and set the correct user name (SP5-816-156) and password
(SP5-816-157).
Install the modem board.
Check correct setting value for modem driver (SP5-816-160,
SP5-816-165 to 171, SP5-816-188 and 189).
Replace the modem board.
Uninstall the modem board if it is installed.
Check that the wired/wireless LAN is working properly.
2-42 SM Appendix