Ricoh D131 Service Manual page 561

SC900: Miscellaneous

The first time that the network gets access to the machine, the management information must
be configured again (this will use a lot of time).
Before you initialize the Netfile partition with SP5832-011, do these steps:
1. Go into the User Tools mode and do "Delivery Settings" to print all received fax documents
that are scheduled for delivery. Then erase them.
2. In the User Tools mode, do Document Management> Batch Delete Transfer Documents.
3. Do SP5832-011, then turn the machine power off and on.
Procedure 3
If "Procedure 2" is not the solution for the problem, do SP5832-001 (HDD Formatting – All), then
turn the machine power off and on.
SP5832-001 erases all document and address book data on the hard disks. Ask the customer
before you do this SP code.
Procedure 4
If "Procedure 3" is not the solution for the problem, replace the HDD.
Scanner image setting error
SC953 D
The settings required for image processing using the scanner are not
sent from the IPU.

Printer image setting error
SC954 D
The settings required for image processing using the printer controller
are not sent from the IPU.

Memory setting error
SC955 D
The settings that are required for image processing using the memory
are not sent from the IPU.

D131/D132/D133
Software defective
Software defective
Software defective
2-94 SM Appendix