Ricoh D131 Service Manual page 795

SP8000 Data Log2
8001 T:Total Jobs
8002 C:Total Jobs
8003 F:Total Jobs
8004 P:Total Jobs
8005 S:Total Jobs
8006 L:Total Jobs

These SPs reveal the number of times an application is used, not the number of pages
processed.

When an application is opened for image input or output, this counts as one job.

Interrupted jobs (paper jams, etc.) are counted, even though they do not finish.

Only jobs executed by the customer are counted. Jobs executed by the customer engineer
using the SP modes are not counted.

When using secure printing (when a password is required to start the print job), the job is
counted at the time when either "Delete Data" or "Specify Output" is specified.

When a copy job on the document server is printed, SP8022 also increments, and when a
print job stored on the document server is printed, SP8024 also increments.

When an original is both copied and stored on the document server, the C: and L: counters
both increment.

When a print job is stored on the document server, only the L: counter increments.

When the user presses the Document Server button to store the job on the document server,
only the L: counter increments.

When the user enters document server mode and prints data stored on the document server,
only the L: counter increments.

When an image received from Palm 2 is received and stored, the L: counter increments.

When the customer prints a report (user code list, for example), the O: counter increments.
D131/D132/D133
These SPs count the number of times each application is
used to do a job.
[0 to 9999999/ 0 / 1]
Note: The L: counter is the total number of times the other
applications are used to send a job to the document
server, plus the number of times a file already on the
document server is used.
3-220 SM Appendix