HDD startup error at power on
SC860
B
HDD is connected but a driver error is detected. The driver did not
respond with the status of the HDD within 30 sec.
HDD is not initialized
Level data is corrupted
Initialize the HDD with SP5-832-001.
HDD is defective
HDD Error 2: HDD Startup
The hard disks were detected at power on, but the disks were not
detected within 30s after recovery from the energy conservation mode.
SC861
B
Cable between the hard disks and controller board disconnected
or loose
Hard disk power connector loose
One of the hard disks is defective
Controller defective
Bad sector overflow
SC862
D
There more 100 bad sectors in image storage area of the HDD.
Format HDD with SP4911-2
HDD defective
SM Appendix
2-81
SC800: Overall System
GW
GW
GW
D131/D132/D133