Ricoh D131 Service Manual page 704

5828 Network Setting
1 IPv4 Address (Ethernet/IEEE 802.11)
Allows you to confirm and reset the IPv4 address for Ethernet and wireless
LAN (802.11): aaa.bbb.ccc.ddd
2 Subnet Mask (Ethernet/IEEE 802.11)
Allows you to confirm and reset the IPv4 subnet mask for Ethernet and
wireless LAN (802.11): aaa.bbb.ccc.ddd
3 Default Gatewary (Ethernet/IEEE 802.11)
Allows you to confirm and reset the IPv4 default gateway used by the network
for Ethernet and wireless LAN (802.11): aaa.bbb.ccc.ddd
6 DHCP (Ethernet/IEEE 802.11)
Allows you confirm and change the setting that determines whether the IP
address is used with DHCP on an Ethernet or wireless (802.11) LAN network.
[0 to 1 / 1 / 1] 0: Not used (manual setting) 1: Used
21 Active IPv4 Address
Allows you to confirm the IPv4 address that was used when the machine
started up with DHCP.
22 Active IPv4 Subnet Mask
Allows you to confirm the IPv4 subnet mask setting that was used when the
machine started up with DHCP.
23 Active IPv4 Gateway Address
Allows you to confirm the IPv4 default gateway setting that was used when
the machine started up with DHCP.
50 1284 Compatibility (Centro)
Enables or disables 1284 Compatibility.
[0 or 1 / 1 / 1 / step]
0: Disabled, 1: Enabled
SM Appendix
SP5000 Mode: SP5821 to SP5990
3-129
CTL
D131/D132/D133