Undo Exec - Ricoh D131 Service Manual

MFP Options
2. Reattach the SD card slot cover.
3. Return copied SD cards to the customer for safekeeping, or tape the copied SD cards to the
inside of the front door.
Do not remove copied SD cards from the machine site.
After an SD card has been copied, it can no longer be used. However, it must be stored in
the machine to serve as proof of purchase by the customer.
The original card can also be used to perform an undo procedure (SP 5873 002). Before
you store an SD card, label it carefully so it can be identified easily if you need to do the
undo procedure (see below).

Undo Exec

Do this procedure if you moved an option from the original SD card to another card by mistake
and you need to restore the original SD card.
1. Turn the main switch OFF.
2. Put the SD card holding the merged applications in SD Card Slot 1.
3. Put the original destination SD card (the one removed from storage) into Slot 2
The SD card in Slot 2 must be the original SD card of the application you want to
move from Slot 1 to Slot 2. You cannot use a blank SD card in Slot 1.
4. Turn the main switch ON.
5. Do SP5873-002 (Undo Exec).
6. Follow the instructions of the operation panel messages.
7. Turn the main switch OFF.
8. Remove the SD cards from the slots.
9. Turn the main switch ON.
D131/D132/D133 2-102 SM