Ricoh D131 Service Manual page 692

RCG Connect Timeout
8
Specifies the connect timeout interval when calling the RCG.
[1 to 90 / 10 / 1 second /step]
RCG Write Timeout
9
Specifies the write timeout interval when calling the RCG.
[1 to 100 / 60 / 1 second /step]
RCG Read Timeout
10
Specifies the read timeout interval when calling the RCG.
[1 to 100 / 60 / 1 second /step]
Port 80 Enable
Enables/disables access via port 80 to the SOAP method.
11
[0 or 1 / 0 / – ]
0: Disabled, 1: Enabled
12 @Remote Communication Permission Setting
This SP code is designed to allow the operator to disable @Remote
communication the printer function manually before copying confidential or
sensitive documents. This prevents the contents of the copied documents from
inadvertently being printed or leaked over the network to an outside
destination.
[0 to 2/1/1]
0: Disabled. Machine is not temporarily disconnected from network.
1: Enabled. Machine is temporarily disconnected from network and the
machine will not print while confidential or sensitive documents are being
copied.
2: Control mode. Only some SP codes can be used to acquire or write data.
RFU (Remote Frimware Update) Timing
Selects the RFU timing.
13
[0 or 1 / 1 / – ]
0: RFU is executed whenever update request is received.
1: RFU is executed only when the machine is in the sleep mode.
SM Appendix
SP5000 Mode: SP5024 to SP5816
3-117 D131/D132/D133