Before You Begin - Ricoh D131 Service Manual

1.2.2 BEFORE YOU BEGIN

Before installing this fax unit:

Print out all data in the printer buffer.

Turn off the main power switch and disconnect the power cord and the network cable.
These installation instructions describe how to install the fax option with one G3 option unit and
two G3 option units.
If you are adding one (or two) G3 options units to a fax unit that has already been installed, you
must first remove the FCU [A] unit and the speaker unit [B]. Once both units have been removed,
you can follow either installation below for one G3 interface unit or two G3 interface units.
1. Disconnect the FCU and speaker unit [A] (
2. Disconnect speaker unit [B] (
SM
x3, x1).
x2).
11 D619