Development Unit
4.7.6 TONER SUPPLY MOTOR
1.
Open the front door.
2.
Swing the toner unit out of the machine and remove the toner bottle.
3.
Bracket [A] (
x 1)
4.
Lock plate [B] (
After re-installation, the tab [C] should be behind the stay and its pin below should be
in the open track below.
5.
Toner bottle unit [A] (
The c-clamp is under the toner unit.
Lift the toner bottle unit off the pegs and lay it on a piece of newspaper to avoid toner spill.
6.
Bottom plate [B] (
2 screws on the bottom, 1 screw on the side.
7.
Toner supply motor bracket [C] (
8.
Toner supply motor [D] (
D131/D132/D133
x 1)
x 1, harness x 1,
x 3, harnesses x 2)
x 2)
x 2)
x 1)
4-62
SM