Ricoh D131 Service Manual page 582

1107 Start Fusing Temp. Time Ad.
This SP allows you to set when to start the fusing temperature adjustment for
the center and end heating lamps.
1 Center Lamp Temperature
D131/D132: [150 to 205/205/1 deg C]
D133: [150 to 190/190/1 deg C]
2 End Lamp Temperature
D131/D132: [150 to 205/205/1 deg C]
D133: [150 to 190/190/1 deg C]
3 Center Lamp Actual Time
D131/D132: [0 to 120/60/1 sec.]
D133: [0 to 60/10/1 sec.]
4 End Lamp Actual Time
D131/D132: [0 to 120/55/1 sec]
For Only TWN [0 to 120/60/1 sec]
D133: [0 to 60/10/1 sec]
5 Center Lamp Temp (Small Size Paper)
D131/D132: [180 to 205/205/1 deg C]
D133: [175 to 190/190/1 deg C]
6 End Lamp Actual Time (Small Size Paper)
D131/D132: [0 to 120/60/1 sec.]
D133: [0 to 60/10/1 sec]
7 Center Lamp Temp (Thick Paper)
D131/D132: [180 to 205/205/1 deg C]
D133: [175 to 200/200/1 deg C]
8 End Lamp Actual Time (Thick Paper)
D131: [0 to 120/0/1 sec.]
D132: [0 to 120/5/1 sec.]
D133: [0 to 120/10/1 sec.]
SM Appendix 3-7
SP1000 Feed
D131/D132/D133