Development Unit
4.7.3 ENTRANCE SEAL AND SIDE SEALS
Removal
Development unit
1.
Entrance seal bracket [A] (
2.
After removing the screws, press in the catches on either end [B] to release the entrance seal
bracket, then remove it.
Clean the entrance seal bracket before re-installing it.
When re-installing, make sure the tabs [C] and notches are engaged at four locations.
3.
Side seals [D]
Remove the side seals from both ends, clean the area, and replace with new seals.
D131/D132/D133
p.4-34
x 2)
4-58
SM