Ricoh D131 Service Manual page 530

Reg. Roller Transport Motor Error
The motor drive PCB detected an error at the motor.
SC725-12 B


SC725-13 B
Z-fold top tray exit motor error
SC725-14 B
The motor driver detects an error.


Z-fold stopper 1 Motor error
The bottom fence HP sensor detected that:
The bottom fence did not arrive at the home position at the
SC725-30 B
specified time.
-or-
The bottom fence failed to leave the home position at the specified
time.



SM Appendix
Motor harness or connector loose, broken, defective
Motor or motor drive board defective
Dynamic Roller Transport Motor Error
The motor drive PCB detected an error at the motor.

Motor harness or connector loose, broken, defective

Motor or motor drive board defective
Motor over current
Motor driver overheat
Motor over-current
Motor driver overheat
Motor harness loose
2-63
SC700: Peripherals
Multi Folder (D615)
Multi Folder (D615)
D131/D132/D133