Reinstallation
After installation, execute SP1904 to calibrate the maximum and minimum paper sizes for the side
fences:
SP1904-001 By-pass Tray Paper Size Detection – Minimum Size: Move the side fences to
the minimum size, then execute this SP.
SP1904-002 By-pass Tray Paper Size Detection – Maximum Size: Move the side fences to
the maximum size, then execute this SP.
4.11.14 BY-PASS TRAY ROLLERS
1.
Right covers
p.4-9
2.
By-pass tray
p.4-116
3.
By-pass cover [A] (
4.
Feed roller [B] (
x 1)
5.
Pick-up roller [C] (
6.
Separation roller [D] (
Even though the FRR mechanisms for the tandem tray (Tray 1), universal trays (Tray
2, Tray 3) by-pass tray and ADF are similar, the only rollers that are interchangeable
are the tandem and universal trays (Trays 1, 2, 3).
Do not touch the surface of new rollers during replacement.
SM
x 2)
x 1)
x 1)
4-117
Paper Feed
D131/D132/D133