Ricoh D131 Service Manual page 531

SC700: Peripherals
SC725-31 B
SC725-32 B
D131/D132/D133
2nd Stopper Motor Error
The 2nd stopper HP sensor did not detect the 2nd stopper in (or
out of) its home position within the prescribed time. The 1st
occurrence causes a jam, and the 2nd occurrence causes this SC
code.

2nd stopper HP sensor dirty

Sensor harness or connector loose, broken, defective

2nd stopper motor harness or connector loose, broken,
defective

Sensor defective

Motor or motor drive board defective
3rd Stopper Motor Error
The 3rd stopper HP sensor did not detect the 3rd stopper in (or out
of) its home position within the prescribed time. The 1st occurrence
causes a jam, and the 2nd occurrence causes this SC code.

3rd stopper HP sensor dirty

Sensor harness or connector loose, broken, defective

3rd stopper motor harness or connector loose, broken,
defective

Sensor defective

Motor or motor drive board defective
2-64
Multi Folder (D615)
Multi Folder (D615)
SM Appendix