Ricoh D131 Service Manual page 552

Log Data Error
An error was detected in the handling of the log data at power on or
SC876 D
during machine operation. This can be caused by switching the
machine off while it is operating.
Log Data Error 1

01

Log Data Error 2

02


Log Data Error 3

03


Log Data Error 4

04

Log Data Error 5

05


Log Data Error 99

99

SM Appendix
Damaged log data file in the HDD
Initialize the HDD with SP5-832-004.
An encryption module not installed
Replace or set again the encryption module.
Disable the log encryption setting with SP9-730-004 ("0" is off.).
Invalid log encryption key due to defective NVRAM data
Initialize the HDD with SP5-832-004.
Disable the log encryption setting with SP9-730-004 ("0" is off.)
Unusual log encryption function due to defective NVRAM data
Initialize the HDD with SP5-832-004.
Installed NVRAM or HDD which is used in another machine.
Reinstall the previous NVRAM or HDD.
Initialize the HDD with SP5-832-004.
Other than the above causes
Ask your supervisor.
2-85
SC800: Overall System
GW
D131/D132/D133