Ricoh D131 Service Manual page 532

SC725-33 B
SC725-34 B
SM Appendix
Jogger Fence Motor
The jogger fence HP sensor did not detect the jogger fence in (or
out of) its home position within the prescribed time. The 1st
occurrence causes a jam, and the 2nd occurrence causes this SC
code.

Jogger fence HP sensor dirty

Sensor harness or connector loose, broken, defective

Jogger fence motor harness or connector loose, broken,
defective

Sensor defective

Motor or motor drive board defective
Dynamic Roller Lift Motor Error
The dynamic roller HP sensor did not detect the dynamic roller in
(or out of) its home position within the prescribed time. The 1st
occurrence causes a jam, and the 2nd occurrence causes this SC
code.

Dynamic roller HP sensor dirty

Sensor harness or connector loose, broken, defective

Dynamic roller lift motor harness or connector loose, broken,
defective

Sensor defective

Motor or motor drive board defective
2-65
SC700: Peripherals
Multi Folder (D615)
Multi Folder (D615)
D131/D132/D133