Ricoh D131 Service Manual page 75

5. Remove the LCT cover [A] (
6. Remove the right stay [B] at
7. Remove the right cover [C] (
8. Attach the front bracket [A] with the beveled corner down (

If the brackets are difficult to install, raise the bottom plate with your hand.
9. Attach the rear bracket [B] with the beveled corner down (
10. Attach the bottom plate extension [C] with the hex nuts (
SM
8 1/2"x14" Paper Size Tray Type 9002 (B474)
x 1).
and re-attach it below at
x 2).
2-31
( x 2).
x 2).
x 2).
x 4).
D131/D132/D133