Ricoh D131 Service Manual page 629

SP2000 Drum
2986 Refresh Mode
Use these SPs configure how refresh mode operates.
1 Interval
Sets the number of prints between refresh mode executions (even during a
job). If set to "0" refresh mode does not execute.
[0 to 25/0/1]
2 Level
Sets the toner consumption level.
[0 to 4/2/1]
3 Repetitions
Sets the number of times toner is consumed during refresh mode execution.
[1 to 3/2/1]
4 Execute Mode
Applies the settings of SP2986-2 and SP2986-3 for execution of the refresh
mode. These settings do not take effect until this SP code is set.
[0 to 4/2/1]
D131/D132/D133 3-54 SM Appendix