Drum Unit
3.
Install the new drum in the OPC unit so that the powdered surface [D] faces the cleaning
blade [E].
4.
Rotate the drum once clockwise [F] until it stops again at the same position.
Never rotate the drum anti-clockwise.
4.6.5 PTL
Remove these parts:
OPC drum
p.4-40
1.
PTL bracket [A] (
2.
PTL [B] (
x 1)
Reinstallation
The shoulder screw [C] must be attached again at its initial location.
D131/D132/D133
x 2)
4-42
SM