Ricoh D131 Service Manual page 1027

Page separation
2 0: Enabled
1: Disabled
Printing the sample image on reports
Bit 4 Bit 3
0 0
3-4
0 1
1 0
1 1
5-6 Not used
Equalizing the reduction ratio among
separated pages
7 (Page Separation)
0: Enabled
1: Disabled
SM
Setting
The upper half only
50% reduction
(sub-scan only)
Same size
Not used
1: If all paper sizes in the machine require
page separation to print a received fax
message, the machine does not print the
message (Substitute Reception is used).
After a larger size of paper is set in a
cassette, the machine automatically
prints the fax message.
"Same size" means the sample image is
printed at 100%, even if page separation
occurs.
User Parameter Switch 19 (13H) bit 4
must be set to "0" to enable this switch.
Refer to Detailed Section Descriptions for
more on this feature.
Do not change the settings.
0: When page separation has taken
place, all the pages are reduced with the
same reduction ratio.
1: Only the last page is reduced to fit the
selected paper size when page
separation has taken place. Other pages
are printed without reduction.
135 D619