Ricoh D131 Service Manual page 355

019 LCS Clear
4. Press Execute, then follow the prompts on the display to complete the procedure.
5. Make sure that you perform the following settings:

Execute SP2115 – Laser Beam Pitch Adjustment

Do the printer and scanner registration and magnification adjustments (See
"Replacement and Adjustment – Copy Image Adjustments: Printing/Scanning").

Do the touch screen calibration (See "Replacement and Adjustment – Touch Screen
Calibration").

Referring to the SMC data lists, re-enter any values, which had been changed from their
factory settings.

Execute SP3001-002 – ID Sensor Initial Setting

Make sure that SP 5112 is set to 'enabled', or the user will not be able to use
non-standard paper sizes.

Set SP 1902 001 (amount of fusing unit web used so far) to the most recent setting (see
the SMC list).
6. Check the copy quality and the paper path, and do any necessary adjustments.
SM
Initializes the LCS (Log Count Service) settings.
5-3
Resets
D131/D132/D133