Quenching Lamp; Drum Potential Sensor - Ricoh D131 Service Manual

4.6.6 QUENCHING LAMP

Remove:

OPC drum p.4-40
1. Quenching lamp [A] (

At the center, push back the hook to release the quenching lamp.

Use only a blower brush to clean the quenching lamp.

4.6.7 DRUM POTENTIAL SENSOR

Remove:

OPC drum p.4-40
1. Drum potential sensor [A] (
2. After replacing the drum potential sensor, do SP2962 (Adjustment of Drum Conditions), only if
SP3901 (Auto Process Control) is on).
SM
x 1)
x 2, x 1)
4-43
Drum Unit
D131/D132/D133