Switchover Permission Time
If no key is pressed when there is an application with display control rights,
these SP settings allow the system to shift to the application standing by after
the specified time as elapse. This SP switches the switchover permission
5913
timer on/off.
[0 to 1/1/1]
0: OFF
1: ON
Mechanical Counter Detection
Displays whether the mechanical counter is installed in the machine.
[0 to 2]
5915
0: Not detected
1: Detected
2: Unknown
5952 Fact Adjust Mode
5959 Paper Size
1 Tray 1
Select a paper size for the tray 1.
[0 or 1 / NA: 1, Others: 0 / 1]
0: A4, 1: 8
1/2
5 Tray 4 (LCT) Japan only
6 Cover Sheet
SM Appendix
x11
3-161
SP5000 Mode: SP5821 to SP5990
D131/D132/D133