Ricoh D131 Service Manual page 1008

Interval for preventing the
machine from entering Energy
Saver mode if there is a pending
transmission file.
Bit 5 Bit 4
4-5
0 0
0 1
1 0
1 1
6-7 Not used
No Function
Parallel Broadcasting
0 0: Disabled
1: Enabled
Priority setting for the G3 line.
1 0: PSTN-1 > PSTN-2 or 3
1: PSTN-2 or 3 > PSTN-1
2-7 Not used
System Switch 17 - Not used (do not change these settings)
System Switch 18 - Not used (do not change these settings)
D619
If there is a file waiting for transmission, the
machine does not go to Energy Saver mode
Setting
during the selected period.
After transmitting the file, if there is no file
1 min
waiting for transmission, the machine goes to
30 min
the Energy Saver mode.
1 hour
24 hours
Do not change
System Switch 16 (SP No. 1-101-023)
1: The machine sends messages
simultaneously using all available ports during
broadcasting.
NOTE: If a customer wants to keep a line
available for fax reception or other reasons,
select "0" (Disable).
This function allows the user to select the
default G3 line type. The optional SG3 units are
required to use the PSTN-2 or 3 setting.
Do not change these settings.
Comments
116 SM