Install The Key Card Bracket And Assembled Key Counter - Ricoh D131 Service Manual

Install the Key Card Bracket and Assembled Key Counter


Make sure that the machine is turned off and unplugged from its power source before you
do this procedure.
1. Use a pair of nippers to remove the screw hole cover [A].
2. Use the tip of a small screwdriver to remove plate [B].
3. Attach the assembled key counter to the side of the machine at [A] ( x1 Stepped) and [B]
( x1, x1)
SM
Card Reader Bracket (B498), Key Counter Bracket (B452)
2-93 D131/D132/D133