Replacement With A Used Development Unit - Ricoh D131 Service Manual

Replacement with a Used Development Unit

When using a development unit from another machine for test purposes, execute the following
procedure.
1. Check the value of SP2220 (Vref Manual Setting) in both the machine containing the test unit
and the machine that you are going to move it to.
2. Install the test development unit, then input the V
3. After the test, reinstall the old development unit, and change SP2220 back to the original
value.
SM
for this unit into SP2220.
REF
4-37
Drum Unit
D131/D132/D133