Hdd - Ricoh D131 Service Manual

PCBs and HDD

4.12.4 HDD

1. Controller box cover
2. Disconnect the HDD bracket from the machine frame ( x3).

The screws are held in place by rubber grommets.

The screws will not come out; just keeping turning them counter-clockwise until you feel
them come off.
3. Free the harnesses at [A] ( x2).
4. Disconnect the HDD [B] (
5. Lay the HDD bracket [A] on a flat surface.
6. Turn the bracket over [B], and then remove the screws ( X4).
D131/D132/D133
p.4-122
x2).
4-128 SM