Duplex Unit; Duplex Unit Removal; Reinstallation - Ricoh D131 Service Manual

Duplex Unit

4.10 DUPLEX UNIT

4.10.1 DUPLEX UNIT REMOVAL

1. Open the front door and pull out the duplex unit.
2. Remove the slide rail roller on the left [A] and on the right [B] ( x 1).
3. Lift out the duplex unit [C].

Reinstallation


To re-install the duplex unit, insert the duplex unit partially, only until it enters the black guide
rail, then re-attach each slide rail roller.

Next, push the duplex unit into the machine completely. This method prevents interference
from the guide plate during installation.
D131/D132/D133 4-88 SM