Slave Procedure 2 - Ricoh D131 Service Manual

10. Re-attach the SD card slot cover, and then switch the machine on.
11. At the Ready screen, press [User Tools/Counter]
12. Touch the Administrator Tools tab.
13. Make sure the two items shown above are Off.

Slave Procedure 2

1. Under the System Administrator tab, touch [Program/Change/Delete Remote Machine].
2. Enter the IP address (or host name) of the Master machine.

Only one Master machine can be registered on the Slave machine.

Do not try to do more than one setting.
3. Touch [Exit] to close the screen.
SM
on the operation panel.
33 D619