Ricoh D131 Service Manual page 743

SP6000 Peripherals
5 NA: 2-Hole
6103 Skew Correction: Buckle Adj.
This SP corrects punch hole alignment by correcting the skew of each sheet.
To do this, it adjusts the amount of time the finisher entrance roller remains off
while the exit roller of the machine remains on. This buckles the leading edge
of the sheet slightly against the finisher entrance roller while it remains off.
1 A3 SEF
2 B4 SEF
3 A4 SEF
4 A4 LEF
5 B5 SEF
6 B5 LEF
7 DLT SEF
8 LG SEF
9 LT SEF
10 LT LEF
11 12*18
12 Other
D131/D132/D133
[-5 to +5/0/0.25 mm]
+ Value: Increases the time that the finisher entrance roller
remains off.
- Value: Descreases the time that the finisher entrance
roller remains off.
3-168 SM Appendix