SP6000 Peripherals
6007
ADF Input Chk
6008
ADF Output Check
DF Free Run
6009
Performs an ADF free run in duplex original mode.
1 Simplex
2 Simplex (Stamp)
Stamp Position Adj.
6010
Adjust the position of "Finished" stamp.
[-5 to 5 / 0 / 0.1 mm]
ADF Org Size Priority
6016
Allows selection of alternate settings for automatic original size detection.
[0 to 255/0/1]
ADF Mag. Ad.
6017
Allows settings for the speed of the sheet through.
[-5 to 5/0/0.1]
ADF Mag Adj
If the original is small (B6, A5, HLT), the delay sensor detects the leading edge
of the sheet and delays the original at the entrance roller for the prescribed
number of pulses to buckle the leading edge and correct skew.
6020
[0 to 1/1]
0: Delay skew correction only for small originals
1: Delay skew correction for all originals, regardless of size. (May reduce the
scanning speed of the ADF)
D131/D132/D133
p.3-297
p.3-298
3-166
SM Appendix