Ricoh D131 Service Manual page 712

Stand-by Doc Max Number
Expands the scope of used resources and performance. Switch this off if this
142
feature is not being used.
[0 to 1/1/1] 1: ON 2: OFF
5840 [IEEE 802.11]
6 Channel Max
Sets the maximum number of channels available for data transmission via
the wireless LAN. The number of channels available varies according to
location. The default settings are set for the maximum end of the range for
each area. Adjust the upper 4 bits to set the maximum number of channels.
DFU
Note: Do not change the setting.
[1 to 11 or 13 / 11 or 13 / 1 /step]
Europe/Asia: 1 to 13
NA/ Asia: 1 to 11
Channel Min
Sets the minimum number of channels available for data transmission via
the wireless LAN. The number of channels available varies according to
location. The default settings are set for the minimum end of the range for
each area. Adjust the lower 4 bits to set the minimum number of channels.
7
DFU
Note: Do not change the setting.
[1 to 11 or 13 / 1 / 1 /step]
Europe: 1 to 13
NA/ Asia: 1 to 11
SM Appendix
SP5000 Mode: SP5821 to SP5990
3-137
CTL
D131/D132/D133