Ricoh D131 Service Manual page 908

14. The FCU [A] and G3 unit [B] are connected with an FFC.
15. Lower the FFC connector tab on the G3 unit [C] and raise the FFC connector tab on the FCU
[D].
16. With its green side facing up, set one edge of the FFC into the slot of the FCU [A] and lock it
( x1).
17. With its green side facing down, set the other edge of the FFC into the slot of the G3 interface
unit [B] and lock it (
18. Confirm that both green sides on either edge of the FFC are facing one another.
D619
x1).
16 SM