1.4.5 INITIALIZING THE FAX DEFAULT PROGRAM
After one of the following types of machines has been designated a Slave machine for remote fax
connection, the Fax Default Program (fax operation screen after power on) must be executed to
restore the factory default settings:
An MFP machine previously operated as an independent fax but will now be designated a
Slave machine.
An MFP previously used as a Master machine and now to be designated a Slave machine.
Before executing the Fax Default Program, always review and note the user settings in
case some of this information is lost during initialization.
The procedures below show you how to initialize the settings with the Fax Default Program, and
how to check and reset settings that may have been lost by initialization.
Fax Scan Setting Information on the Normal Fax Screen
1.
Touch the [Scan Settings] button.
D619
42
SM