Using The Debug Log; Setting Up "Save Debug Log; To Switch Debug Log On - Ricoh D131 Service Manual

Using the Debug Log

5.7 USING THE DEBUG LOG
This machine provides a debug log feature that allows the service technician to save and retrieve
error information for analysis.
Every time an error occurs, debug information is recorded in RAM but this information is lost when
the machine is switched off and on.
To capture this debug information, the Save Debug Log feature provides two main features:

Switching on the debug feature so error information is saved directly to the HDD for later
retrieval.

Copying the error information from the HDD to an SD card.

When a user is experiencing problems with the machine, follow the procedures below to set
up the machine so the error information is saved automatically to the HDD. Then attempt to
duplicate the problem so the error data will be stored.

5.7.1 SETTING UP "SAVE DEBUG LOG"

The debug information cannot be saved until the "Save Debug Log" function is switched on and a
target is selected.

To Switch Debug Log On

1. To enter the SP mode, press
2. Select SP5857.
SP5857 >>
Save Debug Log
3. Push [#Enter].
SP5857-001
On/Off
4. Push [#Enter].
<On/Off>
*OFF
D131/D132/D133
together (5s), release, then press [#Enter].
5-24 SM