Ricoh D131 Service Manual page 1037

PSTN dial-in routing setting
5 0: OFF
1: ON
6 Not used
Action when there is no box
with an F-code that matches
the received SUB code
7
0: Disconnect the line
1: Receive the message
(using normal reception mode)
No Function
0-4 Not used
IP-Fax dial-in routing selection
5 0: Off
1: On
PSTN 2 dial-in routing
6 0: Off
1: On
PSTN 3 dial-in routing
7 0: Off
1: On
Communication Switch 19 - Not used (do not change the settings)
Communication Switch 1A - Not used (do not change the settings)
SM
1: The machine sets multiple PSTN dial-in
numbers in the PSTN dial-in line and transfers
received data from each PSTN dial-in number to
each address.
Do not change the settings.
Change this setting when the customer requires.
Communication Switch 18 (SP No. 1-104-025)
Do not change the settings.
1: Transfers received data to each IP-Fax dial-in
number.
IP-Fax dial-in number is a 4-digit number.
Enables or disables dial-in routing for the PSTN 2
connection.
Enables or disables dial-in routing for the PSTN 3
connection.
Comments
145 D619