SP6000 Peripherals
7 DLT SEF
8 LG SEF
9 LT SEF
10 LT LEF
11 12*18
12 Other
6106
Adjust Output Jog Position
Use this SP code to adjust the positions of the jogger fences when the pages
are aligned (jogged) horizontally in the optional output jogger unit. The jogger
fences close in on the sides of the stack on the paper tray. These side fences
move in and out perpendicular to the direction of paper feed.
[-1.5 to +1.5 / 0 / 0.5 mm]
The higher the setting, the narrower the jogger span and the smaller the
gaps between the fences and the edges of the paper. Stacking is tighter.
The lower the setting, the wider the jogger span and the wider the gaps
between the fences and the edges of the paper. Stacking is not as tight.
1 A3 SEF
2 B4 SEF
3 A4 SEF
4 A4 LEF
5 B5 LEF
6 A5 LEF
7 DLT SEF
8 LG SEF
9 LT SEF
10 LT LEF
11 HLT LEF
D131/D132/D133
The settings are done for each paper size.
SEF denotes "Short Edge Feed".
LEF denotes "Long Edge Feed".
3-170
SM Appendix