Image Adjustments: Scanning; Registration: Platen Mode - Ricoh D131 Service Manual

4.14.2 IMAGE ADJUSTMENTS: SCANNING

Before doing the following scanner adjustments, perform or check the printing
registration/side-to-side adjustment and the blank margin adjustment.

Use an S-5-S test chart to perform the following adjustments.

Registration: Platen Mode

1. Place the test chart on the exposure glass and make a copy from one of the feed stations.
2. Check the leading edge and side-to-side registration, and adjust them with the following SP
modes if necessary.
SP No. Name
Scanner Leading
SP4010
Edge Registration
Scanner Side-to-Side
SP4011
Registration
SM
Copy Image Adjustments: Printing/Scanning
Initial
A positive value shifts the image away from the
0 leading edge, a negative value shifts it toward
the leading edge.
A positive value shifts the image toward the
0 right edge, a negative value shifts it toward the
left edge.
4-159
Comment
D131/D132/D133