Ricoh D131 Service Manual page 77

8 1/2"x14" Paper Size Tray Type 9002 (B474)
15. Change the position of the lower limit sensor [A] ( x 1).
16. Attach the harness (not shown) to the back of the plate and secure the sensor connector wire.
17. Attach the LCT cover [A] provided with the kit ( x 1).
18. Re-attach the right cover [B] ( x 2).
19. Connect the LCT to the machine.
20. Switch the machine on, enter the SP mode, then use SP5959 005 (Paper Size – Tray 4 (LCT)
to select the new paper size. For details, see SP5959 in "Service Tables".
SM 2-33 D131/D132/D133