Table of Contents
Advertisement
MFP Options
Installation
Make sure that the main machine is switched off and that its power cord is disconnected
before doing the following procedure.
1.
Switch the machine off.
2.
Remove the controller box cover
3.
Insert the memory DIMM in either slot [A].
4.
Re-attach the controller box cover.
5.
Insert the SD Card into Slot 1.
Make sure the SD Card is inserted and locked in place. If it is partially out of the slot,
push it in gently until it locks in place.
6.
On the operation panel, attach the "Printer" keytop [A] and the "Scanner" keytop [B]. Select
either the English set or Symbol set for installation.
7.
Plug in the power cable and turn the main power switch on.
8.
Change SP5985 -1 and -2 from "0" to "1".
9.
Turn the main power switch off and on.
10. Follow the procedures in the Operation Instructions to complete the installation for the
printer/scanner option.
D131/D132/D133
p.4-122
2-104
SM
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
