Ricoh D131 Service Manual page 689

SP5000 Mode: SP5024 to SP5816
Printer Free Run
Make a base engine free run.
[0 to 1/0/1]
5802
0: Release free run mode, 1:Enable free run mode
Return this setting to off (0) after testing is completed.
Finisher connectors should be disconnected and duplex mode should be off.
5803
Input Check
5804 Output Check
5807 Area Selection
[1 to 7/1/1 Step]
1:Japan 2:NA 3:EU 4:China 5:Taiwan 6:Asia 7:Korea
5810 Fusing SC Clear
When the machine detects a serious problem in the fusing unit, it will issue a
Level A (fatal error) SC code. The machine is disabled and the operator
cannot reset the SC until the machine has been released from the error with
this SC code. Touch [EXECUTE] to release the machine for servicing.
D131/D132/D133
p.3-283
p.3-293
3-114 SM Appendix