Ricoh D131 Service Manual page 90

Finisher SR4080 (D610)
10. Open the front door of the finisher, and remove the screw from the locking lever, then pull out
the locking lever [B].
11. Align the finisher on the joint brackets, and lock it in place by pushing in the locking lever [B].

Before securing the locking lever, make sure that the top edges of the finisher and
the copier are parallel from front to rear as shown [C].
12. Secure the locking lever [B] (
13. Connect the finisher cable [D] to the copier.
14. Set the leveling shoes (x 4) under the feet and level the machine.
D131/D132/D133
x 1) and close the front door.
2-46 SM