Ricoh D131 Service Manual page 534

SC725-37 B
SC725-38 B
1st Fold Motor Error
The motor drive PCB detected an error at the motor.
SC783-3 B


SM Appendix
FM6 Pawl Motor
The FM6 pawl HP sensor did not detect the FM6 pawl in (or out
of) its home position. The 1st occurrence causes a jam, and the
2nd occurrence causes this SC code.

FM6 pawl HP sensor dirty

Sensor harness or connector loose, broken, defective

FM6 pawl motor harness or connector loose, broken,
defective

Sensor defective

Motor or motor drive board defective
Fold Plate Motor Error
The fold plate HP sensor did not detect the fold plate in (or out of)
its home position within the prescribed time. The 1st occurrence
causes a jam, and the 2nd occurrence causes this SC code.

Fold plate HP sensor dirty

Sensor harness or connector loose, broken, defective

Fold plate motor harness or connector loose, broken,
defective

Sensor defective

Motor or motor drive board defective
Motor harness or connector loose, broken, defective
Motor or motor drive board defective
2-67
SC700: Peripherals
Multi Folder (D615)
Multi Folder (D615)
Multi Folder (D615)
D131/D132/D133